US Army Radio Test Set ME-61/GRC Meter, Field Strength

Test Set-00002

Used

US Army

ME-61/GRC Test Set for US Military Radios 1,5 MHz- 24MHz

Manufactured by Multitronics Inc.

used and tested in very good Condition 

Made in USA

More details

This product is no longer in stock

80,59 €

Data sheet

Height100mm
Width200mm
Depth130mm
Weight1300g
MaterialAluminium with Electronic Compartments

More info

Equipment Description

The U.S. military has many Field Strength Meters. These are used for a number of purposes, but the key one is to tune up radios after they are configured on a new frequency. Ham radio operators use a VSWR meter, but that is not possible on many military radios since the antenna attaches directly to the radio, i.e. there is no place that in the antenna system that's 50 Ohms. The "PHONES" jack can by used to hear an AM version of the signal being received by the ME-61. This signal monitor function may be done at the transmitter location in cases where the transmit antenna is located some distance away to confirm that a signal is getting out.

The TM shows the GRC-9 being used to provide a test signal for the ME-61. But the AN/GRC-9 covers only 2 to 12. The AN/GRC-19 (T-195 & R-392) convers 1.5 to 24 MHz matching the ME-61.

30 other products in the same category: